The "Magnum 4-link" was engineered to have an advantage
in its ability to perform its duties as promised, First: The
rear mounting points on BOTH sets of control arms are
retained CLOSE to the centerline of rear axles. This is the
place where torque is produced. This in turn shortens the
lever of resistance against the differential housing trying to
rotate pinion-up during acceleration. This in turn makes the
torque-action of the control arms greater than if these
mounting points were placed further away from the
centerline of the rear axles. Doing this produces  more
push-pull action out of the lower and upper control arms
respectively. Due to the fact that the upper control arms are
half the length of the lower control arms it actually places
the lift point further back. By doing this, again shortens the
lever of resistance against the rear suspension and actually
"
Lifts" the entire Vehicle Weight onto the Rear Axle
allowing for Maximum Traction.
Unequal Length control
arms allows the "Diff Housing" to Pivot as "speed bumps" or
other rough road conditions are encountered. This in turn
provides better ride quality with a Splayed arm design
securely locating the "Diff Housing" without the need for
Diagonal Links. Also in the design are "Mountable forward
mounting points" for the control arms allowing for the
Adjustment of your Instant Center. The system is Universally
adaptable and virtually Bulletproof!!!
-The Magnum 4-Link Team
Search Engine Submission and Internet Marketing
Warranty and disclaimer information:

We at Magnum 4-Link warranty our system to be free from
defects in materials and workmanship forever, also if you
destroy ANY part, excluding the rear gears,  of your
Magnum 4-link system EVER and can put in writing what
happened to cause the failure, you will receive "FREE" of
charge with the exception of shipping a "replacement part".
This is the extent of any warranty implied or given. Neither
the "Manufacturer' or the "retailer" shall be liable for any
damages, loss of property or Life due to the use of this
system. The "purchaser" assumes complete responsibility.
Also purchase and/or use of this product implies
recognition and acceptance of this disclaimer by the
consumer. The user is responsible for ensuring that the
Installation of the "Magnum 4-Link" complies with State,
Federal and Local Laws in regards to Vehicle safety
regulations. In California, some parts may legally be used
only on a racing vehicle, which will never be operated on a
public road. In addition, The installation of this suspension
system may affect the warranty coverage on your vehicle.
U.S. PATENT #
6,042,131
Magnum 4-Link
U.S.
TRADEMARK #
2,350,608
Right Click Here For the Video!!
----------->>>>
This is the Best Well Kept Secret
for Years now after many years of
Testing Here is the Final Product!

The Video Takes About 1 Minute
to Download with Broadband!

Right Click the picture and Click
Save target.

Once Downloaded watch and Enjoy!


-The Magnum 4 Link Team